DHR243Z SDS Plus 3-Mode Hammer Drill 18V Bare Unit
| Weight | 3.761000 |
|---|---|
| Product Brand | Makita |
MORE INFORMATION
The Makita DHR243 SDS Plus 3-Mode Hammer Drill has an efficient brushless DC motor and a quick-change drill chuck. The easy-to-grip handle has been ergonomically designed to give maximum power thrust and a sure, comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip.
The tool body is separated into the upper and lower housings at the foot of the handle portion where the houses are jointed with vibration absorbing cushion rubbers. Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimising battery failures such as terminal breakage or poor electrical contact. There are 3 modes of operation: rotation and hammering, hammering only and rotation only.
Specification:
No Load Speed: 0-950/min.
Impact Rate: 0-4,700/bpm
Impact Energy: 2.0 joules
Capacity: Concrete 24mm, Steel 13mm, Wood 27mm
Weight: 3.3kg
All vibration figures quoted are Tri-axial to EN 60745 2006.
Vibration: Drilling: 3.5 m/sec²
Vibration K Factor: 1.5 m/sec²
Vibration: Hammer Drilling: 13.5 m/sec²
Vibration: Chiselling: 10.5 m/sec²
The Makita DHR243 SDS Plus 3-Mode Hammer Drill has an efficient brushless DC motor and a quick-change drill chuck. The easy-to-grip handle has been ergonomically designed to give maximum power thrust and a sure, comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip.
The tool body is separated into the upper and lower housings at the foot of the handle portion where the houses are jointed with vibration absorbing cushion rubbers.
Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimising battery failures such as terminal breakage or poor electrical contact.
There are 3 modes of operation: rotation and hammering, hammering only and rotation only.
Specifications:
No Load Speed: 0-950/min.
Impact Rate: 0-4,700/bpm.
Impact Energy: 2.0 joules.
Capacity: Concrete 24mm, Steel 13mm, Wood 27mm.
Weight: 3.3kg.
All vibration figures quoted are Tri-axial to EN 60745 2006.
Vibration: Drilling: 3.5 m/sec²
Vibration K Factor: 1.5 m/sec²
Vibration: Hammer Drilling: 13.5 m/sec²
Vibration: Chiselling: 10.5 m/sec²
The Makita DHR243Z SDS Plus 3-Mode Hammer Drill is supplied as a Bare Unit - No Battery or Charger.
BRAND
Makita, the foremost manufacturer of power tools in the world. With 100 years' experience, our products are lauded the world over for both their performance and quality. Makita manufactures its tools in plants across the globe, from its headquarters in Japan to here, in the UK. Our Telford manufacturing plant is the only full-production facility for power tools in the UK and has been successfully running construction on many of our top line cordless power tools since 1991.
Makita's acquisition of Dolmar in 1991 has also meant that we have one of the strongest histories in the Outdoor Power Equipment market and the plant in Germany constantly delivers tools worldwide to the highest quality.
At the heart of our manufacturing process is the belief that for a good tool you need a good motor, and Makita makes every effort to make sure our motors are of the best quality. We source the absolute best raw materials and components in order to build the most powerful and efficient motors we can imagine.
Premium grade steel is used to produce armature shafts and gears, and only steel of the highest grade is used, whilst high grade magnetic copper wire goes into each and every one of our tools to ensure superior current flow whilst withstanding extreme temperatures. Get ARMD with Makita now.